HiFi-ESP32-Input is on Tindie: first prototype

The HiFi-ESP32-Input is now on Tindie for $25. There are just 10 boards for now. This first batch is for people who want to try the idea early and tell me what works and what doesn’t, before I order a larger run.

Experimental · beta-tester edition · feedback welcome. This is the first prototype. It has been bench-tested end to end, but the hardware, the firmware and even the name may still change before the next batch.

HiFi-ESP32-Input board

What it does

Every other board in the ESP32 Audio range turns a network stream into sound. This one goes the other way: it takes a line-level source (a turntable through its phono preamp, a CD player, a tape deck, a TV’s headphone output) and turns it into a Sendspin source in Music Assistant. From there you can play it on any speaker or group in the house, in sync.

It is the HiFi-ESP32-Plus design with the DAC swapped for a PCM1863 stereo ADC, on an ESP32-S3. There is a 3.5 mm minijack and a pair of analog coax sockets, and you switch between them from Home Assistant without re-cabling. The product page has the full specs and setup steps.

The board started as a request on GitHub, where Hedda asked for exactly this: a way to bring analog sources into an open multi-room system, without being locked into one brand’s speakers. Thanks for the push.

Why “beta-tester edition”

  • The hardware is a first prototype. I want to see it in more homes, with more sources, before committing to a larger batch.
  • The software is new too. It needs ESPHome 2026.11.0 or later and a Music Assistant version whose Sendspin support covers sources, not just players. Treat the combination as experimental.
  • Some things are still manual. You set the gain per source, and there is no silence detection yet, so the board streams whatever the selected input carries.

About the price

I would love to give these boards to beta testers for free, but right now that is really hard for me financially. $25 barely covers the production cost, and I hope it doesn’t feel too high.

If it does feel too high for you, reach out to me directly. I’ll find a way to offer a discount or send a free sample.

Feedback welcome

This batch is all about feedback, so please tell me how it goes:

  • what you plugged in, and how the levels and gain worked out
  • how pairing and playback went with your Music Assistant setup
  • anything that broke, confused you or felt missing
  • whether you would use a digital (S/PDIF) input, which I’m considering for a separate board

The best places are the original GitHub issue and Discord. As always, the schematic, PCB and ESPHome configs are open source on GitHub.