The HiFi-ESP32-Input is now on Tindie for $25. There are just 10 boards for now. This first batch is for people who want to try the idea early and tell me what works and what doesn’t, before I order a larger run.
Experimental · beta-tester edition · feedback welcome. This is the first prototype. It has been bench-tested end to end, but the hardware, the firmware and even the name may still change before the next batch.

What it does
Every other board in the ESP32 Audio range turns a network stream into sound. This one goes the other way: it takes a line-level source (a turntable through its phono preamp, a CD player, a tape deck, a TV’s headphone output) and turns it into a Sendspin source in Music Assistant. From there you can play it on any speaker or group in the house, in sync.
It is the HiFi-ESP32-Plus design with the DAC swapped for a PCM1863 stereo ADC, on an ESP32-S3. There is a 3.5 mm minijack and a pair of analog coax sockets, and you switch between them from Home Assistant without re-cabling. The product page has the full specs and setup steps.
The board started as a request on GitHub, where Hedda asked for exactly this: a way to bring analog sources into an open multi-room system, without being locked into one brand’s speakers. Thanks for the push.
Why “beta-tester edition”
- The hardware is a first prototype. I want to see it in more homes, with more sources, before committing to a larger batch.
- The software is new too. It needs ESPHome 2026.11.0 or later and a Music Assistant version whose Sendspin support covers sources, not just players. Treat the combination as experimental.
- Some things are still manual. You set the gain per source, and there is no silence detection yet, so the board streams whatever the selected input carries.
About the price
I would love to give these boards to beta testers for free, but right now that is really hard for me financially. $25 barely covers the production cost, and I hope it doesn’t feel too high.
If it does feel too high for you, reach out to me directly. I’ll find a way to offer a discount or send a free sample.
Feedback welcome
This batch is all about feedback, so please tell me how it goes:
- what you plugged in, and how the levels and gain worked out
- how pairing and playback went with your Music Assistant setup
- anything that broke, confused you or felt missing
- whether you would use a digital (S/PDIF) input, which I’m considering for a separate board
The best places are the original GitHub issue and Discord. As always, the schematic, PCB and ESPHome configs are open source on GitHub.


Leave a Reply
You must be logged in to post a comment.